Home
Quickstart Guide
Introduction RIO Academic RIO Application examples Your first RT app Your first FPGA app
Real-Time
Basic procedures System admin File system I/O monitor System controller architecture Timed loops Inter-process communication RT/Host communication RT/FPGA communication FPGA personalities Interrupts Datalogger (file I/O)
FPGA
Design flow Simulation Inter-process communication RT/host communication Derived clock domain IP blocks FPGA personality
Networking
Get connected Email Web services UDP TCP IP addresses
Site Map
Guides Code examples Procedures Tags LabVIEW block diagram elements Targets Communications All pages
Glossary How to use About
RIO Developer Essentials Guide for Academia

"TCP Read" element

TCP Read

Synchronize the system clock time based on querying the Internet Time Service (ITS) maintained NIST (National Institute of Standards and Technology): Open a TCP/IP connection to the "Daytime Protocol" port 13, read the 51-character string, parse the string for time and date information, validate the result (look for a server health indicator and a "magic string"), and then adjust the system time.
Send TCP/IP messages to a destination IP address and port number, listen for incoming TCP/IP messages on a user-defined port, and echo received messages back to the source. Combine the sender and receiver into a single "TCP ping" application to test the communication channel between two network hosts, and illustrate the notifier method to stop parallel loops with one "stop" button.

TCP client-server
RT code PC code

Create a server on the Academic RIO Device that listens for TCP/IP network connection requests from a client running on the PC host, accepts client information including the desired state of the four onboard LEDs, sets the LEDs accordingly, and returns the state of the onboard 3-axis accelerometer and pushbutton.